English: Several common and uncommon tanto profiles with cross sections at various key locations.
The general blade shape is based on an approximately 25 cm long, 17 mm wide (near the tang), approximately straight hira style blade forged in the early 14th century. This common profile was chosen to allow for easy comparison between styles. The particular shapes of the edges are based on appropriate historical examples.
Again, for ease of comparison, most of the cross-sections are 8.0 mm near the tang (a fairly typical width) arbitrarily tapering to about 80% of this value near the tip.
Actual historical examples would vary in length, width, thickness and curvature.
The hira and kiriha sides of the katakiriha blade have been swapped to allow the tip to point consistently to the left while still showing the chisel like side.
dzielić się – kopiować, rozpowszechniać, odtwarzać i wykonywać utwór
modyfikować – tworzyć utwory zależne
Na następujących warunkach:
uznanie autorstwa – musisz określić autorstwo utworu, podać link do licencji, a także wskazać czy utwór został zmieniony. Możesz to zrobić w każdy rozsądny sposób, o ile nie będzie to sugerować, że licencjodawca popiera Ciebie lub Twoje użycie utworu.
na tych samych warunkach – Jeśli zmienia się lub przekształca niniejszy utwór, lub tworzy inny na jego podstawie, można rozpowszechniać powstały w ten sposób nowy utwór tylko na podstawie tej samej lub podobnej licencji.